TIO9015 - 8-Channel Analog Input-Output Module
TIO9015 - 8-Channel Analog Input-Output Module: Product Overview
The TIO series of products are general-purpose test modules designed for automotive electronic systems and can be used in scenarios such as hardware-in-the-loop (HIL) testing. These modules provide an efficient and flexible way to simulate and test various electronic control units (ECUs) in automobiles, helping engineers to ensure system reliability and performance while accelerating the development cycle and lowering the cost, making them an indispensable tool for automotive electronic system development. It is an indispensable tool in the development of automotive electronic systems.
TIO series devices adopt a highly modular design, users can independently select the required modules to be cascaded through the Remo connector harness, multiple modules cascaded using the same star matching Remo connector harness to access the power supply for the device and connect the CAN/CANFD bus tool can be used to control the TIO series devices through the TSMaster software on the PC.
specificities
- Modular Design: The TIO series adopts a highly modular design, allowing users to quickly configure and expand the test system by selecting the corresponding functional modules according to the test requirements;
- Multifunctional Integration: TIO series devices integrate relay control, resistor simulation, digital input and output, and analog input and output;
- High Precision Output/Acquisition: TIO series devices are capable of providing high precision signal processing, such as resistance simulation, voltage/current output acquisition, and PWM signal output acquisition;
- High software fit: TIO series boards are highly compatible with TSMaster software and can be seamlessly integrated into some of TSMaster's automated test cases, simplifying the configuration process and lowering the threshold of use.
Functional parameters
Voltage output:
| Number of channels | 8 channels |
| Output range | 0V~+60V |
| DAC Resolution | 16bit |
| accurate | Transient Accuracy: ± (0.1%+5mV) |
| Average accuracy: ± (0.1%+5mV) | |
| Output 0V may be up to 300mV depending on the channel. | |
| Output Current | 20mA@4 channels |
| 10mA@8 channels |
Voltage Acquisition:
| Number of channels | 8 channels |
| Measurement range | -60V~+60V, 0V~+60V |
| sampling rate | 250KHz |
| reporting rate | 1kHz (active up) 4kHz (query) |
| ADC Resolution | 20bit |
| accurate | 0~60V Acquisition Mode. |
| Transient Accuracy: ± (0.1%+20mV) | |
| Average accuracy: ± (0.1%+5mV) | |
| -60~60V Acquisition Mode. | |
| Transient accuracy: ± 25mV | |
| Average accuracy: ± 5mV | |
| Input Impedance | 300K Ω |
Current output:
| Number of channels | 8 channels |
| Output range | 0mA~25mA |
| DAC Resolution | 16bit |
| accurate | Transient Accuracy: ± (0.1%+5uA) |
| Average Accuracy: ± (0.1%+5uA) |
Current Acquisition:
| Number of channels | 8 channels |
| Measurement range | 0mA~25mA |
| sampling rate | 250kHz |
| reporting rate | 1kHz (active up) 4kHz (query) |
| ADC Resolution | 20bit |
| accurate | Transient Accuracy: ± (1%+250uA) |
| Average Accuracy: ± (1%+10uA) |
Parameters
| Parameters | Test Conditions | Minimum Value | Typical Value | Maximum Value | Unit | |
| Operating Voltage | DC power supply | 60V output in full-channel self-return mode | 9 | 12.0 | 36 | V |
| Operating Current | – | 0.38 | – | A | ||
| Power Wastage | – | 4.6 | – | W | ||
| CAN Interface | Bus Pin Withstand Voltage | CANH, CAHL | -58 | – | 58 | V |
| Isolation Withstand Voltage | Leakage current less than 1mA | 2500 | – | – | VDC | |
| EMC Electromagnetic Compatibility | ESD | IEC61000-4-2 standard | Contact discharge: 8 Air discharge: 15 |
– | – | kV |
Download
Simplified Chinese
English version
Simplified Chinese
English version
Software package
Please keep in mind
其他信息
| Channel Number | 8 channels (input/output shared) |
|---|---|
| Operating Voltage/Static Power Consumption | 12V/4W |
| Relay Type | Magnetically held relays |
| Installation | modular splicing |
English 
Chinese