太阳集团6138(CHINA)澳门企业-环球百科 /en/product/tio9036/ /en/product/tio9036/#respond Wed, 18 Jun 2025 09:22:48 +0000 /?post_type=product&p=20005 The TIO9036 is a resistor module with 6 independent channels, each of which can realize a resistance output of 1~4194303Ω, and can be used in parallel or series if the resolution or range is not satisfied. The TIO9036 resistor modules can be used in a variety of signaling systems to simulate thermistors or resistive sensors.

The post TIO9036 – 6通道可编程电阻模拟模块 first appeared on 上海太阳集团6138科技有限公司.

]]> The TIO series of products are general-purpose test modules designed for automotive electronic systems and can be used in scenarios such as hardware-in-the-loop (HIL) testing. These modules provide an efficient and flexible way to simulate and test various electronic control units (ECUs) in automobiles, helping engineers to ensure system reliability and performance while accelerating the development cycle and lowering the cost, making them an indispensable tool for automotive electronic system development. It is an indispensable tool in the development of automotive electronic systems.

TIO series devices adopt a highly modular design, users can independently select the required modules to be cascaded through the Remo connector harness, multiple modules cascaded using the same star matching Remo connector harness to access the power supply for the device and connect the CAN/CANFD bus tool can be used to control the TIO series devices through the TSMaster software on the PC.

 

specificities

  • Modular Design: The TIO series adopts a highly modular design, allowing users to quickly configure and expand the test system by selecting the corresponding functional modules according to the test requirements;
  • Multifunctional Integration: TIO series devices integrate relay control, resistor simulation, digital input and output, and analog input and output;
  • High Precision Output/Acquisition: TIO series devices are capable of providing high precision signal processing, such as resistance simulation, voltage/current output acquisition, and PWM signal output acquisition;
  • High software fit: TIO series boards are highly compatible with TSMaster software and can be seamlessly integrated into some of TSMaster's automated test cases, simplifying the configuration process and lowering the threshold of use.

 

Functional parameters

Resistor Output Range 1Ω~4194303Ω
step value 1Ω
Resistance Accuracy 1Ω~500Ω, resistance accuracy ±0.5Ω
500Ω~4194303Ω, resistance accuracy ±0.1%
resistive power 1/4W

 

Note: The TIO9036 requires a minimum of 50ms between commands for resistance setting.

 

Parameters

Parameters Test Conditions Minimum Value Typical Value Maximum Value Unit
Operating Voltage DC power supply Resistance value output 9 12 36 V
Operating Current – 0.83 – A
Power Wastage – 10 – W
CAN Interface Bus Pin Withstand Voltage CANH, CAHL -58 – 58 V
Isolation Withstand Voltage Leakage current less than 1mA 2500 – – VDC
EMC Electromagnetic Compatibility ESD IEC61000-4-2 standard Contact discharge: 8
Air discharge: 15		 – – kV

The post TIO9036 – 6通道可编程电阻模拟模块 first appeared on 上海太阳集团6138科技有限公司.

]]> /en/product/tio9036/feed/ 0